Smartscope Flash CNC 300





A distinctive highly efficient benchtop multi sensor measuring equipment SmartScope Flash CNC 300 proved to be the most unique benchtop systems offered by OGP. Along with the extensive Z-axis measuring to be 250 mm for carrying large attachments, it also provides the combination of state-of-the art video and focuses automatically giving high efficiency. It adds preferred (TTL) through-the-lens laser, multi type probes i.e. touch & micro, to configure advanced multi sensor equipment.

Features include:

  • Unmatchable “elevating bridge” designed structure fits into the area of as less than as 0.6 cubic meters easily. Vertically straight built structure ensures the severe volumetric configuration.
  • High-quality automatic calibrated AccuCentric 12x zoom lens delivers the amazing optical functioning than any other system of its category.
  • The TTL coaxial lightening and inbuilt LED SmartRing light comes as a standard features.


SmartScope CNC 670 serves as advanced multi-tasking measuring equipment having the features of XYZ measuring coverage. Its substantial measurement moving makes it appropriate for measuring the boards of circuit and similar parts which are large as flat panel displays (FPDs). It can also be operated on masks and cascaded assemblies of smaller parts. Its mechanical design ensures the footprint of a small system.

Performance: SmartScope CNC 670 is a travelling bridge equipment in which the head of the instrument travels in the X- axis across granite bridge whereas the bridge moves in the corresponding tracks of Y-axis. The granite bridge delivers excellent metrological firmness across the entire X-axis. The Y-axis measurement confirms huge accuracy and recursion. The bridge is surmounted on a large granite platform for stability. The drives are driven by DC motors that ensure faster travelling along XY at 200 mm/sec. The measured parts rest as it is whereas XYZ sensor movements are staged speedily and precisely.

Optics: This CNC equipment has large zooming range with precise magnifying optics. The acquired 12x zoom AccuCentric lens provides a high measuring range and auto-calibrates itself after each change in magnification. This provides uniform accuracy throughout its area and over the entire period of time.

Illumination: LED-lightening includes green backlight, surface light having white coaxial TTL, and OGP inbuilt programmable SmartRing light promotes high illumination needs easily.

Metrology S/W: Quantify –X metrology s/w avails extensive operations and logical controls. Preferred MeasureMind 3D MultiSensors/w ensure full 3D compatibility with whole sensor and rotatory collaboration. SmartScope CNC 670 can be easily programmed as full auto-operated equipment.

Multisensor efficiency: To enhance amazing performance of video measurement, CNC 670 provides the capabilities in measuring the comprehensive multisensor having touch probe/optical laser.

SmartScope CNC 670














Aerospace industry broadly uses the precise metal casting most preferably, as jet engine components. To maximize the functioning and weight, they are manufactured in a very complex shapes and sizes. These structures provide high strength and extreme heat resistance. Somehow, its complex shapes and sizes make measuring more difficult but benefit the manufacturers of aerospace.

ShapeGrabber® Advantages:

• Aerospace parts having complex shapes can ideally be inspected by 3D laser scanners.

• It allows severe quality control steps to be implemented to precise metal casting.

• Representation of true surface geometry is done in few minutes by capturing data points in millions.

• CAD models are easily comparable to scans available.

• Scan data avails the accurate and punctual feedback on the procedures. This feature allows speedy and better structured design and works for optimization.

• ShapeGrabber provides the possibility to inspect whole part and carry out the fast pass/fail decisions with certainty. It minimizes the tedious work of slow CMM with few sample points collected.


ShapeGrabber for Metal Castings

ShapeGrabber equipments are prominent for using with metal casting in particular, because:

• Complex shapes having compound curves can be measured accurately with them.

• It takes only few minutes to complete scanning of millions of data points that in turn provides opportunity to check out the complete part during production only.

• Visually examined nature of the result reduces the time of troubleshooting takes in source of problem and return back to production.

• It requires less costly fixtures for the parts to be scanned. Hence, it saves ample of capital there.

• Results after scanning are documented in form of reports automatically and later, it can be given to customers in order to assure the quality.

• ShapeGrabber equipments have various types of scanning options such as automated, portable, big and small 3D to incorporate various needs.

ShapeGrabber for Metal Castings




Vici MTL X5








MTL X5 has been designed for measuring dental implantation, biomedical parts, micro-mechanical, and watch parts in general. It has high resolving capacity, apart from its group, helping it to detect the rare of the rarest detail. This feature makes it standout product in the list of its own sector. The design of accessing directly, simplifies the loading and unloading process even of most difficult of managing pieces.

The inbuilt constant components and flickering optics averts the part from vibrating or falling while measurements. No hole and undercut means small parts fall but they can easily be retrieved. MTL 250 is a machine with optical measurement for all types of turnery (mechanical) having cylindrical parts.

This machine is used specifically for solving the measurements of valves, screws, fittings, and fine parts. Efficient enough to operate directly providing practical, fast and automatic substitute for profile projectors, manually done SPC systems and workshops meant for measurement of shape defects. Having full range of operations, for collecting data as well as measurement, it is so far the one stop solution for getting the best out of your investments.

MTL Evo/Ergonis a result of vigilant analysis of demands in production, availing optimum functioning, easily driven and consistency over time. In adverse condition, the “Air Flow” system allows the machine to be used.

Step-master is present to ensure the correct working procedure of machine constantly. The conformation with adjusting sensors guards the optics from jerks at the time of loading and unloading of pieces and creating the area free for operator.


For total and precise control using just one tool.

The proper administration of the quality is as important process as there are many phases required for the execution of the same.

Only for this reason, using one tool for measuring almost everything provides much better controlling accuracy and saves time and manpower significantly.


SmartScope ZIP 250 sets a high standard in benchtop metrology. This durable system features fast stage speed for maximum throughput and short cycle times, without sacrificing accuracy. A heavy duty cast base with Y-axis center drive assures metrological stability.

Like all ZIP systems, SmartScope ZIP 250 is equipped with MeasureMind 3D MultiSensor metrology software and 5:1 AccuCentric zoom optics. It is ideal for a wide variety of manufacturing industries and locations.

Every SmartScope ZIP 250 is multisensor capable. (SmartScope ZIP 250 multisensor)

Just add laser, touch probe, or micro-probing sensors and you’ll measure your most complicated parts in a single setup.

SmartScope ZIP 250



SmartScope ZIP Lite 300




SmartScope ZIP Lite 300 is similar to the benchtop SmartScope ZIP Lite 250, but with expanded XYZ measurement volume of 300x300x150 mm. It, too, features joystick controlled precision mechanical bearing motorized stages and 0.5 µm linear scales mounted to a granite base and column, providing metrological stability and measurement precision. Its patented AccuCentric 7:1 motorized zoom lens auto-calibrates itself with every magnification change, over the life of the measurement system. The zoom lens keeps images in focus and on-axis throughout its zoom range, and a variety of optional lens attachments and adapter tubes expand the magnification range, for additional value and versatility. LED coaxial and profile illumination combine with the patented white-LED SmartRing programmable ring light to provide lighting for varying measurement conditions. SmartScope ZIP Lite 300 also provides multisensor touch probe or DRS™ laser support.

SmartScope ZIP Lite 300 is equipped with MeasureMind 3D MultiSensor metrology software, providing full 3D measurement capability and advanced measurement algorithms. Measure-X is optional, in lieu of MeasureMind 3D.

Every SmartScope ZIP Lite 300 is multisensor capable.

Add multisensor flexibility at any time with touch probe or laser options.


SmartScope Flash CNC 200 – the smallest member of the Flash family of systems – is a full-featured automatic measurement system. Innovative design features of “elevating bridge” and an embedded computer mean the system takes up little space on a benchtop while providing an ample 8″x8″x6″ measuring range and extensive measurement capabilities.

SmartScope Flash CNC 200 has patented innovations that let you do more, and do it faster. The computer controlled LED array backlight tracks X-axis motion of the optics with no moving parts. SmartRing ™ light is standard for the ultimate flexibility in surface illumination.

Do even more! Every SmartScope Flash CNC 200 is multisensor capable.

SmartScope Flash CNC 200 is a great video measuring machine. Add touch probe, laser and micro-probes and it’s a full-fledged multisensor measurement system. SmartScope Flash CNC 200 – a compact, automatic measurement value.

Want to know more about the SmartScope Flash CNC 200? Contact your local representative today.

Do you have a specific application? Want to know if this is the right system for your application? Call or email now for a no-obligation application study.

SmartScope Flash CNC 200










QVI SprintMVP is a benchtop, automatic, non-contact measurement system with full CNC control for value-conscious customers.

Built on a solid granite base and column, QVI SprintMVP provides the kind of performance that has made SmartScopes popular around the world.

Motorized translation stages with precision scales make measurements fast and accurate.Measure-X metrology software allows any operator to achieve repeatable measurements on the most complex parts.

Measure-X is feature-packed dimensional metrology software with an extensive array of measurement tools that emphasize ease of use including intelligent edge detection, user friendly icons and a point and click interface.

Key Technologies

  • High quality 6.5 to 1 zoom lens
  • Solid, stable, reliable granite structure
  • Measure-X metrology software
  • 0.5 µm scales in XYZ axes
  • High resolution color camera
  • Convenient joystick control of all axes




©TS Loh Pty Ltd. ABN 22122926210. Last Updated April 28, 2015